%%%%%%%%%%%%%%%%%%%% author.tex %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% sample root file for your "contribution" to a proceedings volume
% Use this file as a template for your own input.
%
%%%%%%%%%%%%%%%% Springer %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\documentclass{svproc}
% RECOMMENDED %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% to typeset URLs, URIs, and DOIs
\usepackage{url}


% Additional Packages %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\usepackage{hyperref}
\usepackage{tabularx}
\usepackage{booktabs}
% \usepackage[labelfont={bf},labelsep=period]{caption}
% \usepackage{subcaption}
% \usepackage{multirow}
% \usepackage{type1cm}
% \usepackage{subeqnarray}
% \usepackage{footmisc}
\usepackage{graphicx}
% \usepackage{gensymb}
% \usepackage{xcolor}
% \usepackage{amsmath}
% \usepackage{cleveref}
% \usepackage{amssymb}
\usepackage[a4paper,left=47.00mm, right=46.00mm, top=50.00mm, bottom=56.00mm]{geometry}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% IF using References from .bib file use these otherwise comment out 
\usepackage[numbers,sectionbib]{natbib}
\bibliographystyle{styles/bibtex/spbasic}
\makeatletter
\renewcommand{\@biblabel}[1]{\makebox[1em][l]{#1.}}
\makeatother
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\UrlFont{\rmfamily}


\begin{document}


\mainmatter              % start of a contribution
%
\title{Contribution Title}
%
\titlerunning{Contribution Title}  % abbreviated title (for running head)
%                                     also used for the TOC unless
%                                     \toctitle is used
%


\author{First Author \inst{1[0000-1111-2222-3333]}
\and Second Author\inst{2[1111-2222-3333-4444]} etc.}
%
\authorrunning{First Author et al.} % abbreviated author list (for running head)
%
%%%% list of authors for the TOC (use if author list has to be modified)
\tocauthor{First Author, Second Author}
%
\institute{Princeton University, Princeton NJ 08544, USA,\\\and
Institut für Kontinuumsmechanik, Leibniz Universität Hannover\\
\email{f.author@Princeton.edu}*, \email{s.author@uni-hannover.de}
}

\maketitle              % typeset the title of the contribution

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This canbe removed or commented out
\begin{center}
    \MakeUppercase{Please mark the Corresponding Author with his/her email address}
\end{center}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{abstract}
The abstract should summarize the contents of the paper
using at least 70 and at most 150 words. It will be set in 9-point font
size and be inset 1.0 cm from the right and left margins. There will
be two blank lines before and after the Abstract. \dots
% We would like to encourage you to list your keywords within
% the abstract section using the \keywords{...} command.
\keywords{First Keyword, Second Keyword, Third Keyword, Forth Keyword, Sixth Keyword.}
\end{abstract}
%
This document is a guide for Conference submissions. 
Please restrict your document to 10 pages for the full paper.

\section*{Page Size, Margins and Font }
%
The page size is standard A4, with the margins listed in Table below. The document is based on the font Times New Roman. The standard font size is 10pt. The paper title is 14pt bold faced. Section titles are 12pt bold faced; subsection titles are 10pt italics. Figure and table captions are 9pt. 

\begin{table}[ht]
    \centering
    \begin{tabularx}{0.6\textwidth}{>{\raggedright\arraybackslash}X 
   >{\centering\arraybackslash}X 
   >{\centering\arraybackslash}X 
   >{\centering\arraybackslash}X 
   >{\centering\arraybackslash}X }
        \toprule
        Page & Top & Bottom & Left & Right \\
        \hline 
        First & 5.0 & 5.6 & 4.7 & 4.6 \\
        Rest  & 5.0  & 5.6 & 4.7 & 4.6 \\
        \toprule
    \end{tabularx}
\end{table}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\newpage % Should be removed
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\section{First Section}
%
Please note that the first paragraph of a section or subsection is not indented. The first paragraphs that follows a table, figure, equation etc. does not have an indent, either. 

Subsequent paragraphs, however, are indented. 
%
\subsection{A Subsection Sample}
%
Figures/Tables should be centred within the page width and numbered sequentially. Figures/Tables should be numbered separately. Multiple figures should be referred using letters (e.g. Fig. 1a or 1b). 

In the text a figure/table is referred as “Fig. 1a shows the drag coefficient...” or “the slope of the lift coefficient switches from negative to positive at the critical Re (Fig. 1b)”. 
%
\subsubsection{Sample Heading (Third Level).}
%
Only two levels of headings should be numbered. Lower level headings remain unnumbered; they are formatted as run-in headings. 

\paragraph{Sample Heading (Forth Level).}
The contribution should contain no more than four levels of headings. The following \autoref{tab:Headers} gives a summary of all heading levels. 


\begin{table}[ht]
    \centering    
    \caption{Table captions should be placed above the tables.}
    \label{tab:Headers}
    \begin{tabularx}{0.6\textwidth}{>{\raggedright\arraybackslash}X 
   >{\centering\arraybackslash}X 
   }
        \toprule
        Heading level & Font size and style \\
        \hline
        Title (centered)  & 14 point, bold \\
        1st-level heading & 12 point, bold  \\
        2nd-level heading & 10 point, bold  \\
        3rd-level heading & 10 point, bold  \\
        4th-level heading & 10 point, italic  \\
        \toprule
    \end{tabularx}
\end{table}

Displayed equations are centered and set on a separate line, and numbered sequentially. Equations must be referred in the text as “Eq. (\ref{eq:first}) defines strain sensitivity”. Equations must be referred in the text as “Eq. (1)” for one equation or “Eqs. (1), (2) and (3)” for multiple equations. 

\begin{equation}\label{eq:first}
    x + y = z
\end{equation}


Please try to avoid rasterized images for line-art diagrams and schemas. Whenever possible, use vector graphics instead (see Fig. 1). 

\newpage
\begin{figure}[ht]
    \centering
    \vspace{2em}
    \footnotesize
    \def\svgwidth{0.9\columnwidth}
    \input{Example_Fig.pdf_tex}
    \caption{A figure caption is always placed below the illustration. Short captions are centered, while long ones are justified.}
    \label{fig:Rotor_Matlab}
\end{figure}


For citations of references, we prefer the use of square brackets and consecutive numbers. Citations using labels or the author/year convention are also acceptable. The following bibliography provides a sample reference list with entries for journal articles \cite{First_A}, an LNCS chapter \cite{SF_Author},, a book \cite{FST_Author}, proceedings without editors \cite{First_A_Second}, as well as a URL \cite{LNCS_Home}. 

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% ---- Bibliography Style 1 ----
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \begin{thebibliography}{6}

% \bibitem {First_A} Author F (2016) Article title. Journal 2(5): 99 – 110. 

% \bibitem {SF_Author}
% Author F, Author S (2017) Title of a proceedings paper. In: Editor F, Editor S (eds.) Proceedings Title, pp. 1 - 13. Springer, Heidelberg.  

% \bibitem {FST_Author}
% Author F, Author S, Author T (1999) Book title. 2nd edn. Publisher, Location. 

% \bibitem {First_A_Second}
% Author F (2010) Contribution title. In: 9th International Proceedings on Proceedings, pp. 1–2. Publisher, Location. 

% \bibitem {LNCS_Home}
% LNCS Homepage, \url{http://www.springer.com/lncs}, last accessed 2016/11/21. 

% \end{thebibliography}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% ---- Bibliography Style 2 ----
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\vspace{-0.6cm}
\renewcommand{\bibname}{
    \begin{flushleft}References
    \end{flushleft}
    }
\small

\bibliography{literature}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% ---- Bibliography end ----
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\end{document}
