Effects of laser power, scan speed and heat treatment on microstructure and hardness of PBF-LB inconel 718 | 2026 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Abdelghany Ahmed, Jaskari Matias, Westman Sami, Poutiainen Ilkka, Järvenpää Antti Muu painopiste Konetekniikka LUT School of Energy Systems
Experimental and Numerical Investigation of Mechanical Properties of Laser-Welded Additively Manufactured Inconel 718 | 2026 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Khedr Mahmoud, Khosravi Ali, Abdelghany Ahmed W., Järvenpää Antti, Hamada Atef Saad Liiketoiminta ja yhteiskunta LUT School of Energy Systems
Laser welding of additively manufactured 316L stainless steel fabricated with different building orientations | 2026 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Khedr Mahmoud, Abdelghany Ahmed W., Elsayed Mohamed, Gaafer A. M., Järvenpää Antti, Hamada Atef Liiketoiminta ja yhteiskunta LUT School of Energy Systems
Eco-friendly reinforcement of dental composites with poly(methyl methacrylate) and hydroxyapatite synthesized from eggshell waste | 2025 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Yerou Amine, bouiadjra Bel Abbes Bachir, Khatir Omar, Bouziane Mohamed Mokhtar, Elmeguenni Mohamed, Khedr Mahmoud, Järvenpää Antti Liiketoiminta ja yhteiskunta LUT School of Energy Systems
Machine learning-based prediction of bushing dimensions, surface roughness and induced temperature during friction drilling of pre-heated A356 aluminum alloy | 2025 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Khedr Mahmoud, Abdalkareem Ahmed, Monier Amr, Afify Rasha, Mahmoud Tamer S., Järvenpää Antti Muu painopiste LUT School of Energy Systems
Role of printing density in internal defect evolution and hydrogen embrittlement of PBF-LB 316L stainless steel fabricated from recycled powder | 2025 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Khedr Mahmoud, Elkhouly Khaled, Jaskari Matias, Finnilä Mikko A. J., Järvenpää Antti, Abdelghany Ahmed W Digitaalinen murros Muu painopiste Liiketoiminta ja yhteiskunta LUT School of Energy Systems
Tailoring microstructure and mechanical properties of additively manufactured H13 tool Steel: Influence of build orientation and tempering treatments | 2025 Tyyppi A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä Tekijä(t) Hosseinlou Hassan, Shakeri Mohsen, Abdelghany Ahmed W., Jaskari Matias, Järvenpää Antti, Hamada Atef Digitaalinen murros Liiketoiminta ja yhteiskunta Materiaalitiede LUT School of Energy Systems